Doshi Nickel Alloys

Mild Steel Fittings are essentially mild carbon steel fittings. There are pipe fittings made up of low cs, high carbon steels and mild carbon steels. The different fittings such as the MS Pipe Elbow can be made in the mild carbon steels materials. The ms pipe fittings range from ½ inches to 12 inches in nominal bore sizes. The different fittings such as the MS Buttweld Tee also have different schedules ranging from sch10s through 80s. There are different functional types of fittings based on their functions.

Pipe fittings of the Hastelloy C22 grade impact the flow of media in the system. Hastelloy C22 Pipe Fittings are superalloy components that are produced with a unique chemical composition allowing them to possess good resistance to creep rupture and oxidation. The Hastelloy C22 Fittings are designed in different shapes and can be utilized in high-temperature conditions where mechanical stress is high. Alloy C22 Pipe Fittings have excellent metallurgical stability and are not sensitive to heating and welding processes. The nickel content in these fittings resists the formation of the grain boundary in the heat-affected zone. ASTM B366 UNS N06022 grade works well in aqueous media and is resistant to pitting by acids and crevice corrosion. The Alloy C22 Fittings have a density of 8.69 g/cm3 and possess a melting point of 1399 degrees C. These fittings possess a hardness of 89 HRB while showcasing good tensile and yield strength. The UNS N06022 Buttweld Fittings are quality-assured and available at the most reasonable prices across all our outlets.

Hastelloy C276 Fittings is used in high temperature and high corrosion prone applications. The material is corrosion resistant and heat resistant because of its unique composition. It is a nickel molybdenum chromium super alloy that is stabilized with tungsten. The Hastelloy C276 Fittings come under the ASTM B366 specification. 

A butt weld eccentric reducer is a type of pipe fitting used in piping systems to connect two pipes of different diameters It is designed to facilitate the transition of flow between pipes while also allowing for a change in pipe size The term eccentric refers to the fact that the centerline of the two connected pipes is not aligned The key feature of a butt weld eccentric reducer is that it has two openings of different diameters a larger one and a smaller one It is used when there is a need to transition from a larger pipe size to a smaller one or vice versa without creating air or vapor pockets in the piping system The reducer has two ends that are designed for butt welding which involves joining the reducer to the pipes by welding the ends directly This creates a strong and leak resistant connection The eccentric design ensures that the fluid or gas flowing through the piping system maintains a consistent flow rate without any buildup of air or vapor

Monel 400 Elbows are resistant to caustic solvents, acids and alkalines, as well as sea water, has high robustness at high temperatures, and are weldable too, used in many marine engineering applications. We offer quality tested, certified UNS N04400 Monel 400 Pipe Fittings in nominal diameters and pressure ratings, which are reliable and join pipes conveying pipes conveying water and gas in the beverage and fire suppression industry.

 Monel 400 Pipe Fittings, which are made of Monel, a Copper-Nickel alloy which is malleable yet durable, are serviceable under a wide range of temperatures and resistant to some corrosive elements.

C-22 is used in severely corrosive media with high chloride and temperature applications such as buffer solutions, active pharmaceutical ingredients (API), fabric softeners, cleaning supplies, and fish, soy and chili sauce. 

C-22 is a great alternative when superaustenitic stainless steels (AL-6XN®, 904L, and 254 SMO®) and duplex stainless steels (2205 and 2507) will not withstand extremely aggressive media. This is because it is a nickel-chromium-molybdenum-tungsten alloy with better overall resistance to uniform and localized corrosion than any other Ni-Cr-Mo alloy, like Hastelloy C-276, C-4, and alloy 625.

Hastelloy C276 Reducer is a very significant amount with all benefits. Our product is being manufactured under the supervision of quality testers to maintain Hastelloy C276 Reducer’s quality before delivering it to our esteem clients. Our product is being recognised globally because of its great finishing, durability and excellent in corrosion resistance. We are offering this Hastelloy C279 Reducer as one of the best-selling and highest demanded product from our inventory. Hastelloy C276 Reducer under the supervision of experts to maintain the quality, and they even go through various methods to cross check the quality standards. By this process, we are helping to offer suitable reducer to our clients.

Hastelloy C276 Fittings is used in high temperature and high corrosion prone applications. The material is corrosion resistant and heat resistant because of its unique composition. It is a nickel molybdenum chromium super alloy that is stabilized with tungsten. There are different types such as the Alloy C276 Buttweld Pipe Elbow which is preferred over the bend because of the gradual change in direction of flow. There are long radius and short radius elbows as well. And they usually come in 45 degrees and 90 degrees angles. The size of the fittings varies from ½ inches to 48 inches in nominal diameter. The Alloy C276 Reducer is used to change the diameter of a pipeline by reducing it to a smaller diameter.

Hastelloy C22 Pipe Fittings is one such type of fitting that can be welded using gas metal arc, gas tungsten arc, or shielded metal arc. Cold worked parts of  ASTM B366 UNS N06022 can be re-annealed for optimum resistance to corrosion. ASTM B366 UNS N06022 Material work hardens rapidly that generates heat during cutting. Because of its high shear strength,it also offers high resistance to metal removal. Hastelloy C22 Forged Fittings also resist crevice corrosion and pitting in reducing environments.

Stainless Steel Stub Ends are crucial components in piping systems, designed to facilitate the connection of pipes and other fittings. Made from high-quality stainless steel, our stub ends provide superior strength, corrosion resistance, and durability, making them ideal for demanding industrial environments. These fittings are available in both long and short patterns, accommodating various application needs.

Stainless Steel Stub End is a type of pipe fitting used to connect pipes together. The fitting has a stub or a piece of pipe with an outward flare on one side. This enables the fitting to be welded to a pipe of same diameter and wall thickness.

Pipe nipples are sometimes referred to as barrel nipples which unless otherwise stated, are tapered NPT threaded at each end with an unthreaded section in the middle. Nipples that are threaded on both ends are commonly referred to as T.B.E which stands for threaded both ends

DOSHI NICKEL ALLOYSis amongst the top companies which are involved in manufacturing and supplying a premium quality range of Hastelloy C22 Coupling. These are used in various industries for different purposes and are highly durable in nature. Offered couplings are available in sizes and models as per the clients requirements and specification. In addition, these are available in market at competitive prices.

 Hastelloy Alloy Nipple, which is used for recycled scrap in pressure vessels, along with pipes and valves in chemical industry applications. We also offer these products in different grades such as Hastelloy Nipple, Hastelloy Nipple, Hastelloy Nipple, Hastelloy Nipple, and Hastelloy X Nipple. 

.Hastelloy Stubends are the outlet fittings that connect the pie with perfection and avoids leakage and breakage. One side of the Hastelloy Stubend is shaped as a pipe, and the other is connected to the pipe. These Hastelloy Stubend are easy to connect ad dismantle. These Stubends provide a clear passage and are easily removable, which results in easy maintenance, cleaning, or repair can be done. This assembly and dismantling cause no damage to the pipe and give sufficient quality and accuracy in functioning

Titanium is the most useful and suitable material which is appropriate to use for Pipe Fitting manufacturing. This metal has advantages like corrosion resistance, good weldability, ductility, strength, and formability. All these features make these Fittings durable and more perfect for many critical operations. Titanium has two different grades that are Grade 2 and Grade 5. Both of these grades have different specifications, measures, and properties.

S32750 Pipe Fittings has a higher level of tungsten and copper, giving it better corrosion resistance in seawater and brine environments. Therefore, the choice between UNS S32750 and S32760 pipe fittings will depend on the specific application and the corrosion resistance and strength required. The main difference between UNS S32750 and S32760 pipe fittings is their chemical composition and resulting properties.Super Duplex Steel S32760 Pipe Fittings have several key properties that make them ideal for many industries, including oil & gas, marine, construction, and aerospace. These include high tensile strength (up to 1100MPa), excellent weldability, good impact strength at low temperatures (-50°C), and excellent corrosion resistance. Super Duplex S32750 Cross Pipe Fittings also have high thermal conductivity, making them ideal for heat transfer applications such as heat exchangers. Despite their hardness, they also have good machinability, making them easy to shape into desired size or shape.

Titanium Pipe Fittings and Grade 2 Titanium Straight Tees are significantly lighter than steel and have better corrosion resistances for applications within the Chemical Processing and other various Industrial applications. Grade 2 Titanium Straight Tee Pipe Fittings are available in schedule S10 and S40.

Strength to weight ratio is best in titanium Grade 2 of any corrosion-resistant material. One of the most common Titanium is Grade 2 and it is used for offshore oil installation water pipelines, bleaching plants in the paper industry and condenser tubing, and also used as heat exchangers for some applications. Titanium Grade2 has good density and also a good conductor of thermal conductivity. And the modulus of elasticity is also excellent and the melting point is 3040 Degree Celsius in this grade. It has an ultimate tensile and yield strength. It is available in hot rolled, dull finish, smooth finish, bright cold rolled matte finish and various finishes available.

Titanium Pipe Fittings and Grade 2 Titanium Eccentric Reducer are significantly lighter than steel and have better corrosion resistances for applications within the Chemical Processing and other various Industrial applications. Grade 2 Titanium Eccentric Reducer Fittings are available in schedule S10 and S40. 

 Monel 400  Nipple is made available in various sizes and shapes. Monel 400 One End Threaded Nipple is highly appreciated among our clients for their precise design and durability. The corrosion resistance of Monel 400 Both End Threaded Nipple is substantially equivalent to that of Alloy K500 Nipple. As would be expected from its high copper content, Monel 400 Concentric Swaged Nipple is rapidly attacked by nitric acid and ammonia systems. Monel 400 Eccentric

These Titanium Grade 2 Both End Threaded Nipple is extremely resistant and tensile strong (even at extreme temperatures). Unalloyed titanium and “commercially pure” titanium are both terms used to describe titanium Grade 2 Concentric Swaged Nipple. A corrosion-resistant material with the best strength-to-weight ratio is titanium Grade 2. In Titanium Grade 2 Eccentric Swaged Nipple, the only impurities present are iron, nitrogen, and oxygen, which work to reduce elongation while improving mechanical qualities (hardness, yield, and tensile strength)

grade f5 fittings are strong with 950MPa minimum tensile strength and 880MPa minimum yield strength. The fittings can be seamless, ERW, welded, fabricated or CDW. The Grade 5 titanium pipe fitting is light weight, corrosion resistant and high temperature capable. The melting point of the material is above 1600 degrees Celsius and this allows the ASME sb 381 grade f5 forged fittings be used in high temperature services such as heat exchangers, aerospace applications, automotive parts and in engine parts.

Titanium Tee, Titanium Pressure Fittings may be considered in any application where formability and corrosion resistance are important, and strength requirements are moderate. Ti Grade 5  has also been widely used in marine and chemical applications such as condensers, evaporators, reaction vessels for chemical processing, tubing and tube headers in desalinization plants, and cryogenic vessels. Other uses have included items such as jigs, baskets, cathodes and starter-sheet blanks for the electroplating industry, and a variety of medical application for Titanium Pressure Fitting.

To provide top-notch quality and suitable Couplings to complete various industrial applications, we design and develop customized Couplings as per the needs of our esteem clients. Our Titanium Couplings has all beneficial features and applications which are making them perfect for any industrial use.

 Inconel 625 Pipe Fittings include various applications where it can be used, such as engine thrust-reverser systems, jet engine exhausts, boiler furnaces, turbine shroud rings, chemical process equipment, and aircraft ducting system, etc. this alloy is the first choice for applications that require high heat resistance and corrosion in a highly acidic environment. However, the use of Inconel Tube Fittings makes them less susceptible to chemical attacks. 

These high qualities of Inconel 625 Pipe Reducer have an extra exceptional fatigue power and stress-corrosion cracking resistance to chloride ions. We, Priminox Overseas are manufacturing Inconel 625 Pipe Reducer under a wide range of atmosphere and pressures to ensure wide acceptance in the chemical processing field. We are developing this high quality of pipe reducers in such a way that will help our customer as well as industry to fulfil their needs and want under very affordable price with low maintenance cost

. The  Inconel 625 is another type of the fittings that is used to connect three pipes together. There are equal tees and unequal tees. The equal tees connect equally sized pipes and the unequal tees connect unequally sized pipes. The buttweld fittings come under the specification ASTM B166 and they standard sizes range from 1/16 inches to 2 inches.

Inconel 625 Hexagonal Reducing Nipple has outstanding fatigue and thermal – fatigue strength. Inconel 625 Nipple is developed for high temperature strength, where its highly alloyed composition provides a high level of general corrosion resistance

In fact, even at cryogenic temperatures, the material does not lose its high strength. With good weldability at a wide temperature range, the Inconel 600 Tee exhibits excellent resistance to chlorine stress related corrosion cracking.

 Inconel 600 Hexagon Nipple is often used in phenol condensers, titanium dioxide, soap manufacture, vegetable vessels, fatty acid vessels and more. Inconel 600 One End Threaded Nipple is also used in Carburizing atmospheres and Ethylene dichloride crackers. 

a wide range of Inconel 600 Pipe Stub Ends across the whole world. We are offering these Stub ends in different standards, dimensions, shape, size and customized specifications. We are offering these pipe Stub Ends that are highly demanded because of its excellent uses in various industrial sectors like chemical plants, oil and thermal power making plants and many more. 

Our high-grade Incoloy 800 Pipe Fittings are utilized in many industrial sectors like petrochemical industry, chemical industry, oil and gas industry, pulp and paper industry, power plant industry, food processing industry, pharmaceuticals industry, energy industry, and aerospace industry. We have a team of a skilled and trained professional who are working hard to deliver the highest quality Fittings

These Inconel 800 Tee are mostly nickel-based which are designed for best corrosion resistance and provides strength at high temperature as well. The Inconel 800HT Forged Tee, and Crossescontains nickel content due to the presence of such alloys makes it more resistant to the chloride stress corrosion cracking and embrittlement from the precipitation of the sigma phase. These Inconel Tee Good resistance to sulfur-containing atmospheres, and High creep rupture strength, Resistance to the carburization and oxidation in the high temperature, Good corrosion resistance in an acidic environment and many more.

A stainless steel pipe elbow fitting is a key part of a piping system for changing the fluid flow direction. It is used to connect two pipes with the same or different nominal diameters and to make the pipe turn in a certain direction of 45 degrees or 90 degrees

Stainless Steel Butt Weld Tees are essential components in piping systems, enabling the smooth transition of fluid flow in multiple directions. Crafted with precision engineering and premium-grade stainless steel, our butt weld tees offer superior strength, corrosion resistance, and longevity, ensuring optimal performance in demanding industrial environments.

Super Duplex Stainless Steel S32750 / S32760 Nipple, which has good weldability and post heat treatment of weld areas not required. Being a two – phase material (austenitic – ferritic) Super Duplex S32750 Hexagon Reducing Nipple will present a different tool wear profile from that of single – phase steels of type ASTM 304L. It is recommended that a tougher insert grade is used than when machining austenitic stainless steels, e.g. Super Duplex S32760 Hexagon Nipple, where the cutting speeds must therefore be lower than that recommended for 304L.

This Monel 400 Pipe Stub Ends is weldable and can be tightened with the threads. We, Priminox Overseas, are designing and developing the supreme quality of products by using all modern and traditional technology. We have appointed a qualified team of experts who keep watch on every stage of the manufacturing process. These Pipe stub ends are tested on various par

this Stub ends with the use of the best quality of raw materials. While manufacturing these Pipe Stub Ends, we also follow the various National and International quality standards. Cu-ni 90/ 10 Pipe Stub ends are manufactured in compliance with the set industry norms and guidelines, and the quality of these Stub Ends never deteriorates.  Our offered range of these Cu-ni 90/ 10 Pipe Stub Ends exceptional chemical and mechanical properties.